Protect eligible glass with a 15-foot acoustic radius, dual-stage thud-and-crash analysis, two-way encrypted E+ communication, and up to 1.2 miles of open-air range.
-
Protect larger interiors with a 49-foot PowerG mirror-optic PIR, active anti-masking, 88-pound pet immunity, and vandal-resistant construction.
-
Handle daily PowerSeries Neo operation from a slim hardwired Icon keypad with a blue status display, five programmable keys, emergency controls, and configurable I/O.
-
Add a supervised indoor warning point with a PowerG siren, high-output white strobe, event-specific tones, tamper protection, and included A-size battery pack.
-
Arm and disarm a compatible IQ system from a slim PowerG keypad with responsive capacitive touch keys, status LEDs, audible feedback, and up to three years of battery life.
-
Protect demanding interiors with a 60 x 80 ft professional TriTech detector, selectable short range, sensor-data fusion, C2DT, and dual tamper.
-
Monitor for dangerous carbon monoxide with a PowerG electrochemical detector, 85 dB local alarm, five-year battery life, and supervised wireless reporting.
-
Add alarm control where it is convenient with a 345 MHz wireless fixed-English keypad, four programmable keys, three-AA battery power, and optional always-on AC operation.
-
Protect windows and glass doors with a PowerG acoustic detector providing 360-degree listening, up to 25-foot range, and five-year battery life.
-
Add PowerG and PowerG+ wireless support for up to 128 zones and 32 wireless keys to compatible IQ Pro, PowerSeries Neo, and PowerSeries Pro controls.
-
Reuse up to eight compatible hardwired burglary zones with a wireless alarm panel using automatic NC/NO and end-of-line detection, supervised backup power, and selectable panel protocols.
-
Add monitored fire detection without new signal wiring using a PowerG photoelectric smoke and 135 F heat sensor with an 85 dB sounder.
-
Give approved users a simpler way to operate PowerSeries Neo with a hardwired Icon keypad that supports proximity tags, codes, programmable keys, and emergency controls.
-
Translate or repeat up to 128 compatible wireless burglary sensors across common 319.5, 345, and 433.92 MHz alarm ecosystems with supervised backup power.
-
Give users fast keypad or tag access with a PowerG capacitive touch keypad, built-in proximity reader, four included tags, status LEDs, and up to three years of battery life.
-
Cover a small or midsize room from above with a low-profile PowerG ceiling PIR providing 360-degree detection across a 32.8-foot diameter.
-
Control compatible conventional or heat-pump HVAC equipment with Z-Wave 700 Series connectivity, humidity sensing, local scheduling, and battery or C-wire power.
-
Reduce costly false alarms with a 49-foot PowerG motion detector combining mirror-optic PIR and K-band microwave confirmation.
-
Improve coverage on a legacy PowerG network with a 915 MHz repeater, visible link-quality testing, wall/case tamper protection, and 48-hour rechargeable backup.
-
Create a narrow exterior detection zone with an IP55 PowerG curtain PIR offering 26-foot range, 85-pound pet immunity, anti-masking, and True Motion Recognition.
-
Watch large open interiors from one ceiling point with a PowerG 360-degree PIR covering up to 65.6 feet in diameter.
-
Extend a compatible PowerG+ network with a modern wireless repeater, 48-hour rechargeable backup, two-way FHSS, tamper protection, and remote firmware updates.
-
Reduce nuisance alarms with a wireless DUAL TEC detector that confirms motion through PIR and X-band microwave sensing, selectable pet modes, and temperature alerts.
-
Program and operate PowerSeries Neo from a hardwired 2 x 16 full-message LCD keypad with 32-character labels, five function keys, and a configurable I/O terminal.
-
Move existing hardwired protection onto a compatible Qolsys IQ system with 8 onboard zones, expansion to 24 zones, 4 PGM outputs, and wired smoke support.
-
Give compatible HVAC systems precise connected control with an OLED touch interface, Z-Wave Long Range, humidity and ventilation support, and optional battery power.
-
Listen for framed-glass breakage with a 433 MHz acoustic detector, dynamic signal processing, two sensitivity levels, and up to 20 feet of tested coverage.
-
Cover a room with a 40 x 40-foot PIR pattern, up to 60 lb pet immunity, adjustable sensitivity, and a long-life 433 MHz transmitter.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Add simple Icon control and PowerG reception from one wall device with a hardwired Neo keypad and built-in 915 MHz transceiver for compatible wireless sensors.
-
Place full alarm control where wiring is impractical with a two-way PowerG keypad, 2 x 16 message display, five programmable keys, four-AA battery power, and optional 9V adapter.
-
Extend a compatible GC2 or GC2e system with a full-color touchscreen, 900 MHz two-way communication, Z-Wave device control, audible alerts, and support for up to four keypads.
-
Use codes or prox tags while adding PowerG wireless capacity with a hardwired Neo Icon keypad, integrated reader, and built-in 915 MHz transceiver.
-
Combine full-message Neo control and wireless expansion in one device with a 2 x 16 LCD keypad and built-in 915 MHz PowerG transceiver for up to 128 wireless zones.
-
Give authorized users code or prox-tag control with a hardwired PowerSeries Neo keypad, full-message LCD, programmable labels, and five one-touch function keys.
-
Combine photoelectric smoke, 135 F heat, carbon monoxide, and low-temperature reporting in one 345 MHz detector with an 85 dBA local sounder and bilingual voice alerts.