Blend advanced perimeter wiring into wood trim with a brown PowerG+ contact, auxiliary input, full-length magnet, battery reporting, and supervised tamper.
-
Add a flexible wired input to a dark-framed opening with a black PowerG+ magnetic contact, full-length magnet, advanced EOL modes, and tamper supervision.
-
Protect an opening and connect a wired device with a white PowerG+ contact supporting reed, NO, NC, EOL, DEOL, and TEOL input modes.
-
Match a standard PowerG contact to wood trim with a brown low-profile housing, encrypted two-way signaling, placement LED, and six-year battery rating.
-
Keep protection discreet on stained wood with a brown slim PowerG+ contact, stronger full-length magnet, supervised tamper, battery reporting, and remote updates.
-
Blend perimeter protection into dark frames with a black PowerG+ slim contact, full-length magnet, tamper supervision, exact battery reporting, and OTA updates.
-
Protect a door or window with a slim white PowerG+ contact, full-length magnet, front/back tamper, battery reporting, and remote firmware support.
-
Manage a compatible PowerG system from a compact four-button key fob with visual/audible confirmation, three-second panic protection, and up to eight-year battery life.
-
Carry four programmable PowerG commands in a slim key-fob design with audible/visual acknowledgment, system-trouble feedback, and a three-second panic delay.
-
Control a compatible PowerG system or trigger a panic command with two large programmable buttons, audible/visual confirmation, false-alarm delay, and wearable accessories.
-
Send a security panic signal from one clearly defined button with a compact water-resistant PowerG key, two-second activation delay, LED confirmation, clip, and neck strap.
-
Add a supervised indoor warning point with a PowerG siren, high-output white strobe, event-specific tones, tamper protection, and included A-size battery pack.
-
Improve coverage on a legacy PowerG network with a 915 MHz repeater, visible link-quality testing, wall/case tamper protection, and 48-hour rechargeable backup.
-
Extend a compatible PowerG+ network with a modern wireless repeater, 48-hour rechargeable backup, two-way FHSS, tamper protection, and remote firmware updates.
-
Add PowerG and PowerG+ wireless support for up to 128 zones and 32 wireless keys to compatible IQ Pro, PowerSeries Neo, and PowerSeries Pro controls.
-
Protect heat-prone areas with a wireless detector selectable for 135 F or 200 F, 12-to-15 F-per-minute rate-of-rise detection, and 50-by-50-foot UL spacing.
-
Protect outdoor gates, garages, and wide-gap openings with an IP56 E+ contact, 1.3-inch magnet gap, two-way encryption, external NO/NC input, and extended 900 MHz range.
-
Cover large interiors with a 30-by-50-foot PIR pattern, adjustable pet immunity up to 85 pounds, two-way encryption, and up to 1.2 miles of open-air E+ range.
-
Secure an indoor opening with a two-way encrypted E+ contact, up to 1.2 miles of open-air range, included alignment spacer, NO/NC external input, and eight-year battery life.
-
Protect eligible glass with a 15-foot acoustic radius, dual-stage thud-and-crash analysis, two-way encrypted E+ communication, and up to 1.2 miles of open-air range.
-
Monitor a sectional garage door or other tilting asset with a 345 MHz sensor that reports movement past 45 degrees, case tamper, low battery, and up to 10 years of battery life.
-
Extend compatible 2GIG and Honeywell 345 MHz sensor coverage with a plug-and-play repeater, encrypted and non-encrypted signal support, supervised power conditions, and 24-hour backup battery.
-
Keep an emergency button close at hand with a water-resistant 345 MHz panic remote, 500-foot open-air range, five-second lockout, multiple wearing options, and switchable encryption.
-
Reuse up to eight compatible wired burglary zones with a 345 MHz takeover module, 500 mA auxiliary output, existing-panel power support, and switchable encryption.
-
Listen for breaking plate, tempered, laminated, or coated glass with a dual-stage thud-and-crash detector, adjustable sensitivity, 15-foot radius, and switchable encryption.
-
Place leak detection exactly where it is needed with a 45-inch remote probe, standing-water detection, 95-degree high and 41-degree low temperature alerts, and five-year battery life.
-
Catch both dripping and pooled water with a dual-source leak sensor that also reports high and low temperature conditions, supports encryption, and installs without screws or tools.
-
Secure doors, windows, or an external dry-contact device with a slim 345 MHz sensor, included spacer, NO/NC input, switchable encryption, and up to eight years of battery life.
-
Protect a door or window without a visible surface sensor using a recessed 345 MHz contact with rare-earth magnet, switchable encryption, and up to five years of battery life.
-
Cover a broad indoor area with a 30-by-50-foot PIR pattern, 100-degree spread, adjustable pet immunity up to 85 pounds, and switchable 345 MHz encryption.
-
Bring compatible existing smoke and CO alarms into the security system with a 345 MHz acoustic listener, six-inch detection distance, switchable encryption, and five-year battery life.
-
Arm, disarm, trigger a panic signal, or operate a programmed relay from a compact 345 MHz four-button remote with switchable encryption and up to 350 feet of open-air range.
-
Bring PowerSeries Neo control to a modern black interface with a 7-inch color touchscreen, proximity reader, customizable menus, QWERTY labels, and SD card support.
-
Operate PowerSeries Neo from a responsive 7-inch color touchscreen with proximity-tag support, customizable home screen, QWERTY label entry, and SD card slot.
-
Use codes or prox tags while adding PowerG wireless capacity with a hardwired Neo Icon keypad, integrated reader, and built-in 915 MHz transceiver.
-
Add simple Icon control and PowerG reception from one wall device with a hardwired Neo keypad and built-in 915 MHz transceiver for compatible wireless sensors.