Preserve a larger wired installation on a compatible Qolsys IQ panel with 8 onboard zones, four expansion slots, up to 40 hardwired zones, and 4 PGM outputs.
-
Move existing hardwired protection onto a compatible Qolsys IQ system with 8 onboard zones, expansion to 24 zones, 4 PGM outputs, and wired smoke support.
-
Secure expansive outdoor approaches with a 350-foot PowerG quad infrared beam, four selectable channels, adjustable response, and IP65 enclosure.
-
Create a long outdoor perimeter line with a 200-foot PowerG dual infrared beam, four selectable channels, adjustable response time, and IP55 protection.
-
Add visible and audible exterior notification with a 110 dB PowerG siren, programmable strobe, IP55 enclosure, and included long-life battery pack.
-
Cover broad exterior areas with a 40-foot PowerG outdoor PIR using Octa-QUAD mirror optics, 40-pound pet immunity, and vandal-resistant construction.
-
Protect exterior gates, overhead doors, and other demanding openings with an IP66 PowerG contact, wide magnetic gap, auxiliary input, and five-year battery life.
-
Watch temperature-sensitive areas with a PowerG detector supporting four programmable thresholds and an optional waterproof external probe.
-
Monitor hard-to-reach leak points with a PowerG flood detector, supervised six-foot water probe, probe-disconnect alert, and eight-year battery life.
-
Catch water at floor level with a low-profile PowerG+ sensor that sounds locally, reports leaks, and adds 41 F freeze alerts on supported panels.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Monitor for dangerous carbon monoxide with a PowerG electrochemical detector, 85 dB local alarm, five-year battery life, and supervised wireless reporting.
-
Add monitored fire detection without new signal wiring using a PowerG photoelectric smoke and 135 F heat sensor with an 85 dB sounder.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.
-
Protect windows and glass doors with a PowerG acoustic detector providing 360-degree listening, up to 25-foot range, and five-year battery life.
-
Listen for framed-glass breakage with a PowerG+ acoustic detector offering up to 25-foot coverage, 360-degree listening, and modern battery reporting.
-
Add visual context to indoor motion alarms with a PowerG+ PIR camera offering 720p peek-in, VGA verification images, infrared capture, and optional pet immunity.
-
Watch large open interiors from one ceiling point with a PowerG 360-degree PIR covering up to 65.6 feet in diameter.
-
Cover a small or midsize room from above with a low-profile PowerG ceiling PIR providing 360-degree detection across a 32.8-foot diameter.
-
Verify outdoor alarms with a PowerG PIR camera combining 40-foot motion coverage, infrared imaging, anti-masking, and 40-pound pet immunity.
-
Create a narrow protective zone across doors, windows, and glass walls with a PowerG curtain PIR offering selectable 6, 12, or 18-foot coverage.
-
Reduce costly false alarms with a 49-foot PowerG motion detector combining mirror-optic PIR and K-band microwave confirmation.
-
Protect larger interiors with a 49-foot PowerG mirror-optic PIR, active anti-masking, 88-pound pet immunity, and vandal-resistant construction.
-
Add dependable room protection with a 915 MHz PowerG PIR sensor, 39-foot pattern, 85-pound pet immunity, temperature reporting, and AES-128 encryption.
-
Cover indoor rooms with a PowerG+ PIR motion detector featuring 39-foot coverage, optional 85-pound pet immunity, long battery life, and remote firmware support.
-
Detect forced-entry vibration before an opening is breached with a PowerG shock sensor, seven-segment sensitivity meter, optional magnetic contact, and auxiliary input.
-
Hide opening protection inside a compatible frame with a PowerG recessed contact, ultra-thin magnet, removable clear flange, and up to ten-year CR-2 battery life.
-
Protect a high-traffic opening with a commercial PowerG contact, two auxiliary inputs, NO/NC/EOL/DEOL/TEOL support, temperature reporting, and tamper resistance.
-
Add a wired auxiliary zone without clashing with wood trim using a brown PowerG contact, NO/NC/EOL selection, link-quality LED, and wall/case tamper.
-
Monitor an opening and a wired contact with a white PowerG sensor, selectable NO/NC/EOL input, visible link indicator, tamper protection, and eight-year battery rating.
-
Match a standard PowerG contact to wood trim with a brown low-profile housing, encrypted two-way signaling, placement LED, and six-year battery rating.
-
Secure a common opening with a low-profile white PowerG contact, visible placement indicator, AES-128 encryption, and up to six-year CR2450 battery life.
-
Add a supervised indoor warning point with a PowerG siren, high-output white strobe, event-specific tones, tamper protection, and included A-size battery pack.