Add a square 25 ft SAT glass-break detector with environmental testing, sound check, Form C relay, and cover tamper to a wall or ceiling.
-
Recess a 25 ft Bosch SAT glass-break detector into a wall or ceiling, with environmental testing, a sound check, and a normally closed output.
-
Monitor framed glass up to 25 ft away with a round Bosch SAT detector, environmental test, sound check, Form C relay, and cover tamper.
-
Conceal acoustic protection in a wall or ceiling with a 25 ft flush-mount detector, four sensitivity levels, two trim sizes, and broad glass support.
-
Protect framed glass up to 25 ft away with FlexGuard signal analysis, four sensitivity levels, broad glass compatibility, and FG701 remote testing.
-
Monitor large open interiors with a 360-degree ceiling TriTech detector, three adjustable PIR sections, microwave supervision, and mounting up to 20 ft.
-
Reduce nuisance alarms with a 40 x 40 ft hardwired TriTech detector combining PIR, 10.525 GHz microwave sensing, and adaptive signal processing.
-
Cover a 40 x 40 ft room with a pet-friendly Bosch PIR, 45 lb pet immunity, dynamic temperature compensation, sealed optics, and no-adjust mounting.
-
Standardize ten darker door frames with brown GRI roller ball switches, 360-degree actuation, terminal blocks, and screw-down flanges.
-
Use a compact white roller ball switch with 360-degree actuation, screw-down flange, terminal block, 0.2-inch travel, and lifetime warranty.
-
Protect a steel opening with a self-locking 3/4-inch recessed contact, 12-inch leads, 1/2-inch steel gap, and UL 10C fire-rated designation.
-
Fit hardwired protection into thin frames with a short 3/8-inch press-fit contact, screw terminals, 1/2-inch standard gap, and lifetime GRI warranty.
-
Use one 433 MHz transmitter for a magnetic contact or garage-door tilt zone plus two normally closed external-contact zones, each with its own serial number.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Listen for framed-glass breakage with a 433 MHz acoustic detector, dynamic signal processing, two sensitivity levels, and up to 20 feet of tested coverage.
-
Add wireless property protection with 135 F fixed-temperature and 15 F-per-minute rate-of-rise heat detection for compatible 5800-series systems.
-
Protect multiple windows from one location with a wireless acoustic glassbreak detector offering a 25 ft maximum range, four sensitivity settings, and ten-year battery.
-
Reduce nuisance alarms with a wireless DUAL TEC detector that confirms motion through PIR and X-band microwave sensing, selectable pet modes, and temperature alerts.
-
Protect gates, sheds, detached garages, and outdoor equipment with a NEMA 4X two-zone 345 MHz contact rated from -40 to 150 F.
-
Add listed wired motion protection with a dual PIR and microwave detector, 49-foot pattern, Form C relay, 33-pound pet immunity, and 32 to 120 F range.
-
Use PIR and microwave confirmation in one wired detector with 49-foot coverage, Grade 2 certification, 33-pound pet immunity, and built-in EOL resistors.
-
Strengthen wired motion protection with a dual PIR and microwave detector, 49-foot range, active anti-masking, Grade 3 certification, and 33-pound pet immunity.
-
Add economical wired room protection with a fully digital PIR, 49-foot coverage, 33-pound pet immunity, built-in EOL resistor, and double tamper.
-
Preserve a larger wired installation on a compatible Qolsys IQ panel with 8 onboard zones, four expansion slots, up to 40 hardwired zones, and 4 PGM outputs.
-
Move existing hardwired protection onto a compatible Qolsys IQ system with 8 onboard zones, expansion to 24 zones, 4 PGM outputs, and wired smoke support.
-
Secure expansive outdoor approaches with a 350-foot PowerG quad infrared beam, four selectable channels, adjustable response, and IP65 enclosure.
-
Create a long outdoor perimeter line with a 200-foot PowerG dual infrared beam, four selectable channels, adjustable response time, and IP55 protection.
-
Add visible and audible exterior notification with a 110 dB PowerG siren, programmable strobe, IP55 enclosure, and included long-life battery pack.
-
Cover broad exterior areas with a 40-foot PowerG outdoor PIR using Octa-QUAD mirror optics, 40-pound pet immunity, and vandal-resistant construction.
-
Protect exterior gates, overhead doors, and other demanding openings with an IP66 PowerG contact, wide magnetic gap, auxiliary input, and five-year battery life.
-
Watch temperature-sensitive areas with a PowerG detector supporting four programmable thresholds and an optional waterproof external probe.
-
Monitor hard-to-reach leak points with a PowerG flood detector, supervised six-foot water probe, probe-disconnect alert, and eight-year battery life.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Monitor for dangerous carbon monoxide with a PowerG electrochemical detector, 85 dB local alarm, five-year battery life, and supervised wireless reporting.
-
Add monitored fire detection without new signal wiring using a PowerG photoelectric smoke and 135 F heat sensor with an 85 dB sounder.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.