DSC WS4965 Tri-Zone Wireless Door/Window Contact

$67.99

Use one 433 MHz transmitter for a magnetic contact or garage-door tilt zone plus two normally closed external-contact zones, each with its own serial number.

Connection & Power

433 MHz SRF

Wireless Connection Signal

Battery Powered

Description

The DSC WS4965 combines three independently enrolled zones in one wireless housing. Its primary zone can operate as a conventional reed-and-magnet contact or as a normally closed tilt sensor for an overhead door, while two additional inputs can connect supported normally closed hardwired contacts or dry-contact switches.

Each zone has a separate serial number and sends its own supervisory message, so the control panel can identify which input changed instead of treating the device as one generic alarm. The built-in reed contact supports a 1/2-inch maximum magnet gap, and tilt mode can add a one-minute transmission delay for doors that need extra entry time. A low-battery LED identifies the transmitter that needs service.

This is especially useful when Allied is expanding an existing DSC installation and nearby hardwired openings can share one 433 MHz path without losing zone identity.

Key Features

  • Three zones with individual serial numbers
  • Primary magnetic reed-contact mode
  • Alternative overhead-door tilt mode
  • Two normally closed external-contact inputs
  • 1/2-inch maximum magnet gap
  • Optional one-minute tilt transmission delay
  • Separate supervision for all three zones
  • Case-tamper reporting
  • Low-battery identification LED
  • Single CR123A lithium battery
  • Typical five-to-eight-year battery life
  • 14 to 120 F operating range

Full Specifications

External Contact Input:
Maximum Magnet Gap:
Connection Type:
Wireless Connection Type:
Wireless Frequency:
Battery Type:
Powered by:
Projected Battery Life:
Compliance & Certifications:
, , ,
Mounting Type:
Operating Temperature Range:
Placement:
Product Color:
System Type:
Weight:
0.109 lbs
Dimensions:
2.9375 × 1.6875 × 1 in
  • The primary zone uses either reed mode or tilt mode, not both at once, and the two external inputs are normally closed only.

Close view of an Alarm.com ADC-VC730P camera with spotlight active at night

0% Financing

Welcome to a New Way to Pay Over Time.

Restrictions Apply.

Get Professional Installation

Available in Select Markets

Calculated at Checkout

Related Products