Honeywell Home 5809SS Wireless Fixed and Rate-of-Rise Heat Detector

$82.09

Add wireless property protection with 135 F fixed-temperature and 15 F-per-minute rate-of-rise heat detection for compatible 5800-series systems.

Connection & Power

345 MHz RF

Wireless Connection Signal

Battery Powered

Description

The Honeywell Home 5809SS combines two methods of heat detection in one supervised wireless device. It sends an alarm when ambient temperature reaches 135 F or when temperature rises by at least 15 F in one minute; the rate-of-rise function operates while the surrounding temperature is below 100 F.

This detector is intended for property protection in dry indoor locations that remain within its published environmental limits. It is not a substitute for smoke detection where life safety is involved, and the fixed-temperature element is non-restorable. If that element activates or the metal disc detaches, the complete detector must be replaced. The 5809SS has no built-in local sounder, so annunciation depends on the connected alarm system.

Allied verifies the environment before installation, enrolls the tamper-supervised 345 MHz zone, and tests communication from the final wall or ceiling location.

Key Features

  • 135 F fixed-temperature heat alarm
  • 15 F-per-minute rate-of-rise detection
  • Rate-of-rise operation below 100 F ambient
  • Up to 50 x 50 ft manufacturer spacing
  • 30 x 30 ft UL spacing limit
  • Dry indoor wall or ceiling mounting
  • Base tamper and low-battery reporting
  • Single CR123A lithium battery
  • 40 to 135 F operating range
  • 4.5-inch diameter x 2.5-inch depth
  • Non-restorable fixed-temperature element
  • Property-protection heat detector; no built-in sounder

Full Specifications

Detection Coverage:
Sensor Compatibility:
Sensor Technology:
Sensor Type:
Compatible Panels:
,
Connection Type:
Wireless Connection Type:
Wireless Frequency:
Battery Type:
Powered by:
Compliance & Certifications:
, , , ,
Mounting Type:
,
Operating Temperature Range:
Placement:
Product Color:
System Type:
Weight:
0.8 lbs
Dimensions:
4.5 × 4.5 × 2.5 in
  • Manufacturer spacing is up to 50 x 50 feet, with a 30 x 30-foot UL spacing limit; actual placement must follow NFPA 72, listing requirements, ceiling conditions, and local code.

Close view of an Alarm.com ADC-VC730P camera with spotlight active at night

0% Financing

Welcome to a New Way to Pay Over Time.

Restrictions Apply.

Get Professional Installation

Available in Select Markets

Calculated at Checkout

Related Products