Place leak detection exactly where it is needed with a 45-inch remote probe, standing-water detection, 95-degree high and 41-degree low temperature alerts, and five-year battery life.
-
Catch both dripping and pooled water with a dual-source leak sensor that also reports high and low temperature conditions, supports encryption, and installs without screws or tools.
-
Hide opening protection inside a compatible frame with a PowerG recessed contact, ultra-thin magnet, removable clear flange, and up to ten-year CR-2 battery life.
-
Strengthen a compatible Z-Wave network with a 700 Series plug-in repeater, S2 security, SmartStart, and published range up to 229 ft indoors or 492 ft outdoors.
-
Control compatible lighting, resistive loads, or small motors from an in-wall switch with Z-Wave Plus, S2 security, 3-way support, and a 15A resistive rating.
-
Keep a familiar toggle-style wall control while adding Z-Wave SmartStart, S2, QuickFit depth, SimpleWire setup, and multi-way support up to six locations. -
Reduce nuisance alarms with a 40 x 40 ft hardwired TriTech detector combining PIR, 10.525 GHz microwave sensing, and adaptive signal processing.
-
Use one 433 MHz transmitter for a magnetic contact or garage-door tilt zone plus two normally closed external-contact zones, each with its own serial number.
-
Catch water at floor level with a low-profile PowerG+ sensor that sounds locally, reports leaks, and adds 41 F freeze alerts on supported panels.
-
Match darker trim with a brown 433 MHz door/window contact featuring a compact body, 5/8-inch magnet gap, external NC input, and case/wall tamper.
-
Carry two-way system control with a backlit icon display, audible feedback, four programmable keys, status request, key lock, and panic function.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Monitor hard-to-reach leak points with a PowerG flood detector, supervised six-foot water probe, probe-disconnect alert, and eight-year battery life.
-
Arm, disarm, trigger a programmed panic, or operate supported outputs with a four-button 433 MHz remote and built-in LED flashlight.
-
Reuse up to eight compatible wired burglary zones with a 345 MHz takeover module, 500 mA auxiliary output, existing-panel power support, and switchable encryption.
-
Protect a door or window with magnetic open/close detection, four-level shock sensing, and a third external contact input in one wireless sensor.
-
Cover large interiors with a 30-by-50-foot PIR pattern, adjustable pet immunity up to 85 pounds, two-way encryption, and up to 1.2 miles of open-air E+ range.
-
Protect outdoor gates, garages, and wide-gap openings with an IP56 E+ contact, 1.3-inch magnet gap, two-way encryption, external NO/NC input, and extended 900 MHz range.
-
Listen for breaking plate, tempered, laminated, or coated glass with a dual-stage thud-and-crash detector, adjustable sensitivity, 15-foot radius, and switchable encryption.
-
Protect multiple windows from one location with a wireless acoustic glassbreak detector offering a 25 ft maximum range, four sensitivity settings, and ten-year battery.
-
Hide open/close protection inside a door or window frame with a compact 433 MHz recessed contact, rare-earth magnet, and flexible press-fit or screw mounting.
-
Add dependable room protection with a 915 MHz PowerG PIR sensor, 39-foot pattern, 85-pound pet immunity, temperature reporting, and AES-128 encryption.
-
Watch temperature-sensitive areas with a PowerG detector supporting four programmable thresholds and an optional waterproof external probe.
-
Add multi-criteria photoelectric smoke, 135 F heat, rate-of-rise, and optional low-temperature reporting to a compatible 5800-series system.