-
Upgrade a compatible Security+ garage opener with myQ support, motion-activated lighting, timer-to-close, and remote-control lockout from one wired wall panel. -
Connect up to 12 compatible COSMO-4W or 4WTA-B detectors to a compatible alarm panel with separate smoke and CO zones and synchronized alarm sounders. -
Connect up to 12 compatible COSMO-2W or 2WTA-B detectors to a compatible panel with separate smoke and CO reporting, maintenance signaling, and EZ Walk testing. -
Add a flexible 12/24V DC DPDT relay with 5A contacts, trigger-status LED, and terminal-block connections for compatible security and control circuits.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized clear LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized amber LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized red LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized blue LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Add a familiar red visual alarm with a 101 dB steady siren, high-intensity LED strobe, rear tamper, and weather-resistant single-gang design.
-
Combine audible and visual warning in a 101 dB tamper-protected siren with a separately wired blue LED strobe and weather-resistant single-gang housing.
-
Project a high-output alarm with a 120 dB outdoor horn, yelp and steady tones, 30-watt rating, and 6-12V DC operation.
-
Add a compact hardwired warning device with a 105 dB output, selectable yelp/steady tones, 15-watt rating, and 6-12V DC input.
-
Deliver a strong indoor alarm with a 106 dB dual-tone siren, 15-watt output, hinged case, terminal strip, and flexible wall/corner/ceiling mounting.
-
Combine four-wire smoke and CO sensing, distinct system signals, RealTest verification, a replaceable CO cell, and temporal-three/four sounder tones. -
Equip a compatible four-wire circuit with photoelectric smoke sensing, a 135 F thermal element, freeze trouble, and an 85 dB temporal sounder. -
Use separate power and alarm wiring with a 4-wire photoelectric smoke detector, drift compensation, removable chamber, and dual-color status LEDs. -
Monitor smoke and carbon monoxide with a 2-wire system detector, replaceable 10-year CO cell, RealTest, distinct panel signals, and 85 dB sounder. -
Combine photoelectric smoke sensing, 135 F heat detection, freeze trouble, and an 85 dB temporal sounder on a compatible two-wire circuit. -
Add system-connected smoke detection with a 2-wire photoelectric head, drift compensation, dual-color status LEDs, and plug-in mounting base. -
Add a square 25 ft SAT glass-break detector with environmental testing, sound check, Form C relay, and cover tamper to a wall or ceiling.
-
Recess a 25 ft Bosch SAT glass-break detector into a wall or ceiling, with environmental testing, a sound check, and a normally closed output.
-
Monitor framed glass up to 25 ft away with a round Bosch SAT detector, environmental test, sound check, Form C relay, and cover tamper.
-
Conceal acoustic protection in a wall or ceiling with a 25 ft flush-mount detector, four sensitivity levels, two trim sizes, and broad glass support.
-
Protect framed glass up to 25 ft away with FlexGuard signal analysis, four sensitivity levels, broad glass compatibility, and FG701 remote testing.
-
Combine 360-degree ceiling PIR coverage and framed-glass break detection in one hardwired housing, with selectable motion and acoustic sensitivity. -
Add discreet overhead protection with a 360-degree ceiling PIR, up to 36 ft diameter coverage, selectable pulse count, and cover tamper.
-
Protect demanding interiors with a 60 x 80 ft professional TriTech detector, selectable short range, sensor-data fusion, C2DT, and dual tamper.
-
Monitor large open interiors with a 360-degree ceiling TriTech detector, three adjustable PIR sections, microwave supervision, and mounting up to 20 ft.
-
Reduce nuisance alarms with a 40 x 40 ft hardwired TriTech detector combining PIR, 10.525 GHz microwave sensing, and adaptive signal processing.
-
Cover a 40 x 40 ft room with a pet-friendly Bosch PIR, 45 lb pet immunity, dynamic temperature compensation, sealed optics, and no-adjust mounting.
-
Protect an indoor room with a 40 x 56 ft hardwired PIR, selectable 80 lb pet immunity, sealed optics, and 2,000-lux white-light immunity.
-
Add listed wired motion protection with a dual PIR and microwave detector, 49-foot pattern, Form C relay, 33-pound pet immunity, and 32 to 120 F range.
-
Use PIR and microwave confirmation in one wired detector with 49-foot coverage, Grade 2 certification, 33-pound pet immunity, and built-in EOL resistors.
-
Strengthen wired motion protection with a dual PIR and microwave detector, 49-foot range, active anti-masking, Grade 3 certification, and 33-pound pet immunity.
-
Add economical wired room protection with a fully digital PIR, 49-foot coverage, 33-pound pet immunity, built-in EOL resistor, and double tamper.
-
Add visual context to indoor motion alarms with a PowerG+ PIR camera offering 720p peek-in, VGA verification images, infrared capture, and optional pet immunity.