Add PowerG and PowerG+ wireless support for up to 128 zones and 32 wireless keys to compatible IQ Pro, PowerSeries Neo, and PowerSeries Pro controls.
-
Improve coverage on a legacy PowerG network with a 915 MHz repeater, visible link-quality testing, wall/case tamper protection, and 48-hour rechargeable backup.
-
Extend a compatible PowerG+ network with a modern wireless repeater, 48-hour rechargeable backup, two-way FHSS, tamper protection, and remote firmware updates.
-
Move existing hardwired protection onto a compatible Qolsys IQ system with 8 onboard zones, expansion to 24 zones, 4 PGM outputs, and wired smoke support.
-
Preserve a larger wired installation on a compatible Qolsys IQ panel with 8 onboard zones, four expansion slots, up to 40 hardwired zones, and 4 PGM outputs.
-
Give compatible DSC Neo and Pro systems an AT&T LTE plus Ethernet Alarm.com path, PC-Link panel connection, Z-Wave Plus, and local communication diagnostics.
-
Add resilient Alarm.com reporting to compatible PowerSeries Neo and Pro panels with a Verizon LTE and Ethernet dual-path communicator, PC-Link integration, and Z-Wave Plus.
-
Add visible and audible exterior notification with a 110 dB PowerG siren, programmable strobe, IP55 enclosure, and included long-life battery pack.
-
Add a supervised indoor warning point with a PowerG siren, high-output white strobe, event-specific tones, tamper protection, and included A-size battery pack.
-
Conceal acoustic protection in a wall or ceiling with a 25 ft flush-mount detector, four sensitivity levels, two trim sizes, and broad glass support.
-
Protect framed glass up to 25 ft away with FlexGuard signal analysis, four sensitivity levels, broad glass compatibility, and FG701 remote testing.
-
Reduce nuisance alarms with a wireless DUAL TEC detector that confirms motion through PIR and X-band microwave sensing, selectable pet modes, and temperature alerts.
-
Protect multiple windows from one location with a wireless acoustic glassbreak detector offering a 25 ft maximum range, four sensitivity settings, and ten-year battery.
-
Protect gates, sheds, detached garages, and outdoor equipment with a NEMA 4X two-zone 345 MHz contact rated from -40 to 150 F.
-
Add wireless property protection with 135 F fixed-temperature and 15 F-per-minute rate-of-rise heat detection for compatible 5800-series systems.
-
Use a compact white roller ball switch with 360-degree actuation, screw-down flange, terminal block, 0.2-inch travel, and lifetime warranty.
-
Standardize ten darker door frames with brown GRI roller ball switches, 360-degree actuation, terminal blocks, and screw-down flanges.
-
Fit hardwired protection into thin frames with a short 3/8-inch press-fit contact, screw terminals, 1/2-inch standard gap, and lifetime GRI warranty.
-
Protect a steel opening with a self-locking 3/4-inch recessed contact, 12-inch leads, 1/2-inch steel gap, and UL 10C fire-rated designation.
-
Use one 433 MHz transmitter for a magnetic contact or garage-door tilt zone plus two normally closed external-contact zones, each with its own serial number.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Listen for framed-glass breakage with a 433 MHz acoustic detector, dynamic signal processing, two sensitivity levels, and up to 20 feet of tested coverage.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.