Protect higher-temperature spaces with a 194 F fixed threshold, restorable 15 F-per-minute rate-of-rise response, and single-circuit mechanical design.
-
Use mechanical heat detection where smoke sensing is unsuitable with a 135 F fixed threshold, restorable 15 F-per-minute rate-of-rise element, and 50 x 50 ft listed spacing.
-
Equip a compatible four-wire circuit with photoelectric smoke sensing, a 135 F thermal element, freeze trouble, and an 85 dB temporal sounder. -
Use separate power and alarm wiring with a 4-wire photoelectric smoke detector, drift compensation, removable chamber, and dual-color status LEDs. -
Combine photoelectric smoke sensing, 135 F heat detection, freeze trouble, and an 85 dB temporal sounder on a compatible two-wire circuit. -
Add system-connected smoke detection with a 2-wire photoelectric head, drift compensation, dual-color status LEDs, and plug-in mounting base. -
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Add wireless property protection with 135 F fixed-temperature and 15 F-per-minute rate-of-rise heat detection for compatible 5800-series systems.
-
Match darker doors and trim with a brown two-zone 345 MHz transmitter featuring a magnetic contact, closed-circuit input, mounting hardware, and CR123A battery.
-
Add two-zone opening flexibility with a white 345 MHz transmitter combining a built-in reed switch, closed-circuit input, included mounting hardware, and CR123A battery.
-
Add visible and audible exterior notification with a 110 dB PowerG siren, programmable strobe, IP55 enclosure, and included long-life battery pack.
-
Monitor for dangerous carbon monoxide with a PowerG electrochemical detector, 85 dB local alarm, five-year battery life, and supervised wireless reporting.
-
Add monitored fire detection without new signal wiring using a PowerG photoelectric smoke and 135 F heat sensor with an 85 dB sounder.
-
Verify outdoor alarms with a PowerG PIR camera combining 40-foot motion coverage, infrared imaging, anti-masking, and 40-pound pet immunity.
-
Add a wired auxiliary zone without clashing with wood trim using a brown PowerG contact, NO/NC/EOL selection, link-quality LED, and wall/case tamper.
-
Monitor an opening and a wired contact with a white PowerG sensor, selectable NO/NC/EOL input, visible link indicator, tamper protection, and eight-year battery rating.
-
Protect heat-prone areas with a wireless detector selectable for 135 F or 200 F, 12-to-15 F-per-minute rate-of-rise detection, and 50-by-50-foot UL spacing.
-
Add extended-range life safety with photoelectric smoke, fixed and rate-of-rise heat, freeze detection, One Go/All Go alarms, two-way encryption, and 900 MHz E+ communication.
-
Combine photoelectric smoke, fixed-temperature heat, rate-of-rise heat, and low-temperature detection with an 85 dB alarm and projected 10-year battery life.
-
Add monitored carbon monoxide protection with a 345 MHz electrochemical detector, built-in 85 dB sounder, tamper supervision, and projected 10-year sensor and battery life.
-
Bring PowerSeries Neo control to a modern black interface with a 7-inch color touchscreen, proximity reader, customizable menus, QWERTY labels, and SD card support.
-
Operate PowerSeries Neo from a responsive 7-inch color touchscreen with proximity-tag support, customizable home screen, QWERTY label entry, and SD card slot.
-
Use codes or prox tags while adding PowerG wireless capacity with a hardwired Neo Icon keypad, integrated reader, and built-in 915 MHz transceiver.
-
Add simple Icon control and PowerG reception from one wall device with a hardwired Neo keypad and built-in 915 MHz transceiver for compatible wireless sensors.