Monitor framed glass up to 25 ft away with a round Bosch SAT detector, environmental test, sound check, Form C relay, and cover tamper.
-
Add a square 25 ft SAT glass-break detector with environmental testing, sound check, Form C relay, and cover tamper to a wall or ceiling.
-
Reduce nuisance alarms with a 40 x 40 ft hardwired TriTech detector combining PIR, 10.525 GHz microwave sensing, and adaptive signal processing.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Monitor hard-to-reach leak points with a PowerG flood detector, supervised six-foot water probe, probe-disconnect alert, and eight-year battery life.
-
Protect multiple windows from one location with a wireless acoustic glassbreak detector offering a 25 ft maximum range, four sensitivity settings, and ten-year battery.
-
Add dependable room protection with a 915 MHz PowerG PIR sensor, 39-foot pattern, 85-pound pet immunity, temperature reporting, and AES-128 encryption.
-
Watch temperature-sensitive areas with a PowerG detector supporting four programmable thresholds and an optional waterproof external probe.
-
Detect forced-entry vibration before an opening is breached with a PowerG shock sensor, seven-segment sensitivity meter, optional magnetic contact, and auxiliary input.
-
Conceal acoustic protection in a wall or ceiling with a 25 ft flush-mount detector, four sensitivity levels, two trim sizes, and broad glass support.
-
Add wireless property protection with 135 F fixed-temperature and 15 F-per-minute rate-of-rise heat detection for compatible 5800-series systems.
-
Use PIR and microwave confirmation in one wired detector with 49-foot coverage, Grade 2 certification, 33-pound pet immunity, and built-in EOL resistors.
-
Create a narrow protective zone across doors, windows, and glass walls with a PowerG curtain PIR offering selectable 6, 12, or 18-foot coverage.
-
Add listed wired motion protection with a dual PIR and microwave detector, 49-foot pattern, Form C relay, 33-pound pet immunity, and 32 to 120 F range.
-
Cover indoor rooms with a PowerG+ PIR motion detector featuring 39-foot coverage, optional 85-pound pet immunity, long battery life, and remote firmware support.
-
Protect exterior gates, overhead doors, and other demanding openings with an IP66 PowerG contact, wide magnetic gap, auxiliary input, and five-year battery life.
-
Protect gates, sheds, detached garages, and outdoor equipment with a NEMA 4X two-zone 345 MHz contact rated from -40 to 150 F.
-
Standardize ten darker door frames with brown GRI roller ball switches, 360-degree actuation, terminal blocks, and screw-down flanges.
-
Protect larger interiors with a 49-foot PowerG mirror-optic PIR, active anti-masking, 88-pound pet immunity, and vandal-resistant construction.
-
Strengthen wired motion protection with a dual PIR and microwave detector, 49-foot range, active anti-masking, Grade 3 certification, and 33-pound pet immunity.
-
Handle daily PowerSeries Neo operation from a slim hardwired Icon keypad with a blue status display, five programmable keys, emergency controls, and configurable I/O.
-
Add a supervised indoor warning point with a PowerG siren, high-output white strobe, event-specific tones, tamper protection, and included A-size battery pack.
-
Arm and disarm a compatible IQ system from a slim PowerG keypad with responsive capacitive touch keys, status LEDs, audible feedback, and up to three years of battery life.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.