Control a compatible PowerG system or trigger a panic command with two large programmable buttons, audible/visual confirmation, false-alarm delay, and wearable accessories.
-
Protect larger interiors with a 49-foot PowerG mirror-optic PIR, active anti-masking, 88-pound pet immunity, and vandal-resistant construction.
-
Reduce costly false alarms with a 49-foot PowerG motion detector combining mirror-optic PIR and K-band microwave confirmation.
-
Monitor hard-to-reach leak points with a PowerG flood detector, supervised six-foot water probe, probe-disconnect alert, and eight-year battery life.
-
Cover broad exterior areas with a 40-foot PowerG outdoor PIR using Octa-QUAD mirror optics, 40-pound pet immunity, and vandal-resistant construction.
-
Protect a door or window with a slim white PowerG+ contact, full-length magnet, front/back tamper, battery reporting, and remote firmware support.
-
Blend perimeter protection into dark frames with a black PowerG+ slim contact, full-length magnet, tamper supervision, exact battery reporting, and OTA updates.
-
Keep protection discreet on stained wood with a brown slim PowerG+ contact, stronger full-length magnet, supervised tamper, battery reporting, and remote updates.
-
Protect an opening and connect a wired device with a white PowerG+ contact supporting reed, NO, NC, EOL, DEOL, and TEOL input modes.
-
Add a flexible wired input to a dark-framed opening with a black PowerG+ magnetic contact, full-length magnet, advanced EOL modes, and tamper supervision.
-
Blend advanced perimeter wiring into wood trim with a brown PowerG+ contact, auxiliary input, full-length magnet, battery reporting, and supervised tamper.
-
Listen for framed-glass breakage with a 433 MHz acoustic detector, dynamic signal processing, two sensitivity levels, and up to 20 feet of tested coverage.
-
Cover a room with a 40 x 40-foot PIR pattern, up to 60 lb pet immunity, adjustable sensitivity, and a long-life 433 MHz transmitter.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Protect a tight-fitting opening with a compact 433 MHz contact, built-in reed switch, 5/8-inch magnet gap, external NC input, and case/wall tamper.
-
Match darker trim with a brown 433 MHz door/window contact featuring a compact body, 5/8-inch magnet gap, external NC input, and case/wall tamper.
-
Use one 433 MHz transmitter for a magnetic contact or garage-door tilt zone plus two normally closed external-contact zones, each with its own serial number.
-
Arm, disarm, trigger a programmed panic, or operate supported outputs with a four-button 433 MHz remote and built-in LED flashlight.
-
Carry two-way system control with a backlit icon display, audible feedback, four programmable keys, status request, key lock, and panic function.
-
Put Stay arm, Away arm, disarm, and panic controls on a durable black-and-chrome 433 MHz key fob with LED confirmation and a five-year battery.
-
Trigger up to three programmable alerts or commands from one wearable 433 MHz button with wrist, pendant, belt-clip, and surface-mount options.
-
Keep door protection out of sight with a 433 MHz recessed contact, strong rare-earth magnet, one-inch gap, tamper reporting, and five-year battery.
-
Monitor an overhead garage door with a magnet-free mechanical tilt sensor, slow-loop false-signal resistance, five-year battery, and extended -22 to 120 F range.
-
Connect existing UL-listed alarms to a compatible DSC system with an audio sensor that recognizes Temporal 3 smoke and Temporal 4 CO alarm patterns.