Ecolink WST-600 FireFighter Smoke/CO Audio Sensor

$46.39

Connect existing UL-listed alarms to a compatible DSC system with an audio sensor that recognizes Temporal 3 smoke and Temporal 4 CO alarm patterns.

Connection & Power

433 MHz SRF

Wireless Connection Signal

Battery Powered

Description

The Ecolink WST-600 FireFighter listens for the standardized alarm tones produced by an existing UL-listed smoke or carbon-monoxide detector. When it confirms a Temporal 3 smoke pattern or Temporal 4 CO pattern, it transmits the corresponding signal to a compatible DSC 433 MHz system for the programmed local and monitored response.

The sensor mounts with its listening ports facing the existing alarm’s sounder and must remain within six inches for proper operation. One FireFighter may monitor an interconnected alarm group because all sounders activate together; non-interconnected alarms require a listener at each sounder that needs monitoring. Separate smoke and CO serial-number programming allows the panel to distinguish the two alarm types.

This device can extend monitoring around existing smoke and CO alarms without replacing their primary sensing function.

Key Features

  • Listens to existing UL-listed smoke and CO alarms
  • Recognizes Temporal 3 smoke-alarm patterns
  • Recognizes Temporal 4 carbon-monoxide patterns
  • Separate smoke and CO panel enrollment
  • Maximum six-inch listening distance
  • Works with interconnected or individual alarm layouts
  • 433 MHz DSC-system compatibility
  • Tamper, low-battery, and periodic supervision
  • Single replaceable CR123A battery
  • Conservative four-year manual-rated battery life
  • 32 to 120 F operating range
  • Wall or ceiling mounting near the alarm sounder

Full Specifications

Connection Type:
Wireless Connection Type:
Wireless Frequency:
Battery Type:
Powered by:
Projected Battery Life:
Compliance & Certifications:
,
Mounting Type:
,
Operating Temperature Range:
Placement:
Product Color:
System Type:
Weight:
0.46 lbs
Dimensions:
3.125 × 3.125 × 1 in
  • The WST-600 does not detect smoke, heat, fire, or carbon monoxide directly; those hazards must first activate a maintained, compatible alarm, and Allied tests the complete audio and radio path after installation.

Close view of an Alarm.com ADC-VC730P camera with spotlight active at night

0% Financing

Welcome to a New Way to Pay Over Time.

Restrictions Apply.

Get Professional Installation

Available in Select Markets

Calculated at Checkout

Related Products