Monitor for dangerous carbon monoxide with a PowerG electrochemical detector, 85 dB local alarm, five-year battery life, and supervised wireless reporting.
-
Add monitored fire detection without new signal wiring using a PowerG photoelectric smoke and 135 F heat sensor with an 85 dB sounder.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Catch water at floor level with a low-profile PowerG+ sensor that sounds locally, reports leaks, and adds 41 F freeze alerts on supported panels.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Combine photoelectric smoke sensing, 135 F heat detection, freeze trouble, and an 85 dB temporal sounder on a compatible two-wire circuit. -
Equip a compatible four-wire circuit with photoelectric smoke sensing, a 135 F thermal element, freeze trouble, and an 85 dB temporal sounder. -
Monitor smoke and carbon monoxide with a 2-wire system detector, replaceable 10-year CO cell, RealTest, distinct panel signals, and 85 dB sounder. -
Combine four-wire smoke and CO sensing, distinct system signals, RealTest verification, a replaceable CO cell, and temporal-three/four sounder tones. -
Create a high-impact exterior warning with a 120 dB warble siren, synchronized amber LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized blue LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized clear LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Create a high-impact exterior warning with a 120 dB warble siren, synchronized red LED strobe, vandal-resistant housing, aluminum backplate, and tamper switch.
-
Combine audible and visual warning in a 101 dB tamper-protected siren with a separately wired blue LED strobe and weather-resistant single-gang housing.
-
Add a familiar red visual alarm with a 101 dB steady siren, high-intensity LED strobe, rear tamper, and weather-resistant single-gang design.
-
Add a supervised indoor warning point with a PowerG siren, high-output white strobe, event-specific tones, tamper protection, and included A-size battery pack.
-
Add visible and audible exterior notification with a 110 dB PowerG siren, programmable strobe, IP55 enclosure, and included long-life battery pack.
-
Add a compact hardwired warning device with a 105 dB output, selectable yelp/steady tones, 15-watt rating, and 6-12V DC input.
-
Project a high-output alarm with a 120 dB outdoor horn, yelp and steady tones, 30-watt rating, and 6-12V DC operation.
-
Deliver a strong indoor alarm with a 106 dB dual-tone siren, 15-watt output, hinged case, terminal strip, and flexible wall/corner/ceiling mounting.