Control a compatible PowerG system or trigger a panic command with two large programmable buttons, audible/visual confirmation, false-alarm delay, and wearable accessories.
-
Protect larger interiors with a 49-foot PowerG mirror-optic PIR, active anti-masking, 88-pound pet immunity, and vandal-resistant construction.
-
Monitor hard-to-reach leak points with a PowerG flood detector, supervised six-foot water probe, probe-disconnect alert, and eight-year battery life.
-
Cover broad exterior areas with a 40-foot PowerG outdoor PIR using Octa-QUAD mirror optics, 40-pound pet immunity, and vandal-resistant construction.
-
Protect a door or window with a slim white PowerG+ contact, full-length magnet, front/back tamper, battery reporting, and remote firmware support.
-
Blend perimeter protection into dark frames with a black PowerG+ slim contact, full-length magnet, tamper supervision, exact battery reporting, and OTA updates.
-
Keep protection discreet on stained wood with a brown slim PowerG+ contact, stronger full-length magnet, supervised tamper, battery reporting, and remote updates.
-
Cover indoor rooms with a PowerG+ PIR motion detector featuring 39-foot coverage, optional 85-pound pet immunity, long battery life, and remote firmware support.
-
Listen for framed-glass breakage with a PowerG+ acoustic detector offering up to 25-foot coverage, 360-degree listening, and modern battery reporting.
-
Add visual context to indoor motion alarms with a PowerG+ PIR camera offering 720p peek-in, VGA verification images, infrared capture, and optional pet immunity.
-
Protect an opening and connect a wired device with a white PowerG+ contact supporting reed, NO, NC, EOL, DEOL, and TEOL input modes.
-
Add a flexible wired input to a dark-framed opening with a black PowerG+ magnetic contact, full-length magnet, advanced EOL modes, and tamper supervision.
-
Blend advanced perimeter wiring into wood trim with a brown PowerG+ contact, auxiliary input, full-length magnet, battery reporting, and supervised tamper.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Listen for framed-glass breakage with a 433 MHz acoustic detector, dynamic signal processing, two sensitivity levels, and up to 20 feet of tested coverage.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Use one 433 MHz transmitter for a magnetic contact or garage-door tilt zone plus two normally closed external-contact zones, each with its own serial number.
-
Protect a steel opening with a self-locking 3/4-inch recessed contact, 12-inch leads, 1/2-inch steel gap, and UL 10C fire-rated designation.
-
Fit hardwired protection into thin frames with a short 3/8-inch press-fit contact, screw terminals, 1/2-inch standard gap, and lifetime GRI warranty.
-
Standardize ten darker door frames with brown GRI roller ball switches, 360-degree actuation, terminal blocks, and screw-down flanges.
-
Use a compact white roller ball switch with 360-degree actuation, screw-down flange, terminal block, 0.2-inch travel, and lifetime warranty.
-
Add wireless property protection with 135 F fixed-temperature and 15 F-per-minute rate-of-rise heat detection for compatible 5800-series systems.
-
Protect gates, sheds, detached garages, and outdoor equipment with a NEMA 4X two-zone 345 MHz contact rated from -40 to 150 F.