Add simple Icon control and PowerG reception from one wall device with a hardwired Neo keypad and built-in 915 MHz transceiver for compatible wireless sensors.
-
Add photoelectric smoke detection, 135 F heat sensing, rate-of-rise response, an 85 dB horn, and automatic drift compensation to compatible DSC 433 MHz systems.
-
Cover a room with a 40 x 40-foot PIR pattern, up to 60 lb pet immunity, adjustable sensitivity, and a long-life 433 MHz transmitter.
-
Listen for framed-glass breakage with a 433 MHz acoustic detector, dynamic signal processing, two sensitivity levels, and up to 20 feet of tested coverage.
-
Give compatible HVAC systems precise connected control with an OLED touch interface, Z-Wave Long Range, humidity and ventilation support, and optional battery power.
-
Move existing hardwired protection onto a compatible Qolsys IQ system with 8 onboard zones, expansion to 24 zones, 4 PGM outputs, and wired smoke support.
-
Add visual context to indoor motion alarms with a PowerG+ PIR camera offering 720p peek-in, VGA verification images, infrared capture, and optional pet immunity.
-
Monitor large open interiors with a 360-degree ceiling TriTech detector, three adjustable PIR sections, microwave supervision, and mounting up to 20 ft.
-
Program and operate PowerSeries Neo from a hardwired 2 x 16 full-message LCD keypad with 32-character labels, five function keys, and a configurable I/O terminal.
-
Reduce nuisance alarms with a wireless DUAL TEC detector that confirms motion through PIR and X-band microwave sensing, selectable pet modes, and temperature alerts.
-
Extend a compatible PowerG+ network with a modern wireless repeater, 48-hour rechargeable backup, two-way FHSS, tamper protection, and remote firmware updates.
-
Add electrochemical CO detection, an 85 dBA local alarm, supervised 345 MHz reporting, and an approximately ten-year sensor to a compatible system.