Bring approved legacy 433 MHz SRF sensors to a compatible Qolsys control with the QC0004-840 internal radio daughter card.
-
Connect approved legacy 345 MHz SRF sensors to a compatible Qolsys IQ control with the QC0005-840 internal radio daughter card.
-
Add approved S-Line and legacy 319.5 MHz sensor support with the Qolsys QC0001-840 SRF daughter card for compatible IQ panels.
-
Add a wired network path to a compatible Qolsys control with the QC000B-840 internal Ethernet communication daughter card.
-
Enable PowerG sensor support in a compatible IQ Panel 4, IQ4 Hub, or IQ4 NS with the QC0008-840 slot-one radio daughter card.
-
Enable approved Zigbee smart-device support on a compatible IQ Panel 4 or IQ4 NS with the QC000E-840 Slot 2 daughter card.
-
Extend a compatible PowerG+ network with a modern wireless repeater, 48-hour rechargeable backup, two-way FHSS, tamper protection, and remote firmware updates.
-
Move existing hardwired protection onto a compatible Qolsys IQ system with 8 onboard zones, expansion to 24 zones, 4 PGM outputs, and wired smoke support.
-
Preserve a larger wired installation on a compatible Qolsys IQ panel with 8 onboard zones, four expansion slots, up to 40 hardwired zones, and 4 PGM outputs.
-
Catch water at floor level with a low-profile PowerG+ sensor that sounds locally, reports leaks, and adds 41 F freeze alerts on supported panels.
-
Detect fixed-temperature and rapid heat increases with a PowerG+ 135 F heat sensor, 85 dB sounder, battery reporting, and standard PowerG fallback.
-
Detect both smoke and rapidly rising heat with a PowerG+ photoelectric sensor, 85 dB local alarm, modern battery reporting, and standard PowerG fallback.