ADI Pro 0E-1541GWS10 Self-Adhesive Surface Contacts, White, 10-Pack
$31.04
Add ten low-profile hardwired contacts with self-adhesive mounting, 12-inch 22 AWG leads, a 0.75-inch gap, and crush-resistant white housings.
Connection & Power
Wired Connection
Description
The ADI Pro 0E-1541GWS10 is a ten-pack of slim surface contacts for indoor openings where drilling a recessed bore is not practical. At 1.5 inches long and just over 1/4 inch high, the white switch and matching magnet sit close to common trim while remaining accessible for service.
A factory-applied adhesive mount speeds placement, and each contact includes 12-inch 22 AWG leads for splicing into the zone cable. The 0.75-inch closed gap and 0.82-inch departure gap give the installer a defined alignment window. The normally open Form A reed is configured for a closed alarm loop and rated at 30 VDC, 0.2 A, and 5 W.
During an existing alarm system takeover, this compact style can replace worn or damaged surface contacts without forcing a larger enclosure onto the frame. Allied cleans the mounting surface, protects the splice, and tests loop resistance so the finished opening is reliable rather than merely stuck in place.
Key Features
- Ten white surface contact sets per pack
- Low-profile 1.5 x 0.375 x 0.281-inch housing
- Self-adhesive surface mounting
- 12-inch 22 AWG wire leads
- Up to 0.75-inch closed magnet gap
- 0.82-inch published departure gap
- Normally open Form A reed contact
- Closed-loop alarm circuit design
- 30 VDC, 0.2 A, 5 W contact rating
- High-impact, crush-resistant construction
- RoHS environmental certification
- One-year manufacturer warranty
Full Specifications
- Detection Type:
- Door/Window Open/Close
- Sensor Technology:
- Magnetic Reed Switch
- Sensor Type:
- Door/Window Contact
- Contact Configuration:
- Normally Open (NO) – Form A
- Contact Loop Type:
- Closed Loop
- Maximum Magnet Gap:
- Up to 0.75 in
- Connection Type:
- Wired
- Wired Connection Type:
- Dry Contact
- Termination Type:
- 12 in Wire Leads
- Compliance & Certifications:
- RoHS
- Mounting Type:
- Adhesive Mount, Surface Mount
- Placement:
- Indoor
- Recommended Application:
- Commercial, Light Commercial, Residential
- Pack Quantity:
- 10
- Product Color:
- White
- System Type:
- Security Sensor
- Weight:
- 0.3 lbs
- Dimensions:
- 1.5 × 0.375 × 0.281 in
0% Financing
Welcome to a New Way to Pay Over Time.
Restrictions Apply.
Get Professional Installation
Available in Select Markets
Calculated at Checkout
